Appearance

Installation ​

OwnPay comes with a built-in web installer. Once you upload the files and create a database, just visit your domain and the installer will guide you through the rest — no command-line knowledge required.

Choose your hosting type below to get started:

Shared Hosting ​

Shared hosting is the easiest way to get started. Most popular hosts like Hostinger, Namecheap, SiteGround, Bluehost, and others work great with OwnPay.

Before You Begin

Make sure your hosting plan supports PHP 8.3 and MySQL. Almost all modern shared hosting plans do.

Step 1 — Download OwnPay ​

  1. Go to the OwnPay GitHub Releases page
  2. Find the latest release at the top of the list
  3. Under the Assets section, click the .zip file to download it (e.g. ownpay-v1.x.x.zip)

Save the file somewhere easy to find on your computer, like your Desktop.

Step 2 — Upload the ZIP to Your Hosting ​

How you upload depends on your control panel. All methods below lead to the same result.

Using cPanel (File Manager) ​

  1. Log in to your hosting control panel (e.g. yourdomain.com/cpanel)
  2. Open File Manager
  3. Navigate to your website's root folder — usually public_html or a subfolder like public_html/pay
  4. Click Upload at the top
  5. Choose the OwnPay .zip file you downloaded and wait for the upload to complete

Using DirectAdmin (File Manager) ​

  1. Log in to DirectAdmin
  2. Click File Manager from the main menu
  3. Navigate to domains/yourdomain.com/public_html/
  4. Click Upload Files, then select the .zip file

Using Plesk (File Manager) ​

  1. Log in to Plesk
  2. Go to Files from the left sidebar
  3. Navigate to httpdocs/ (this is your web root)
  4. Click the + button, then Upload file, and choose the .zip

Using FTP (FileZilla or similar) ​

If your host does not have a built-in file manager, use an FTP client:

  1. Connect to your server with your FTP credentials (host, username, password, port 21)
  2. On the right panel (server side), navigate to public_html/ or your website folder
  3. Drag and drop the .zip file from your computer to the server

Step 3 — Extract (Unzip) the Files ​

After uploading, you need to extract the ZIP on the server.

In cPanel File Manager ​

  1. Click on the uploaded .zip file to select it
  2. Click Extract in the toolbar at the top
  3. A dialog will appear — click Extract File(s)
  4. The files will be extracted into the current folder

After extracting, you should see folders like public/, src/, config/, storage/, etc.

In DirectAdmin / Plesk File Manager ​

Right-click the .zip file and choose Extract or Unzip.

Folder Structure Check

After extracting, make sure you don't have a double-nested folder like public_html/ownpay-v1.x.x/.... If that happens, move all the files one level up so that the public/ folder is directly inside public_html/.

Step 4 — Create a MySQL Database ​

You need an empty database for OwnPay to store its data.

In cPanel ​

  1. From cPanel home, click MySQL Databases
  2. Under Create New Database, type a name (e.g. ownpay_db) and click Create Database
  3. Scroll down to MySQL Users → Add New User
  4. Enter a username (e.g. ownpay_user) and a strong password — write these down, you will need them later
  5. Click Create User
  6. Scroll down to Add User To Database
  7. Select your new user and your new database, click Add
  8. On the permissions page, check ALL PRIVILEGES, then click Make Changes

In DirectAdmin ​

  1. Go to MySQL Management → Create new Database
  2. Enter a database name and click Create
  3. Then go to MySQL Management → Create new User
  4. Enter a username and password
  5. Assign the user to your database with All Privileges

In Plesk ​

  1. Go to Databases from the left sidebar
  2. Click Add Database
  3. Enter a database name
  4. Under Related database user, create a new user with a strong password
  5. Click OK

Save Your Database Details

Write down (or copy to a notepad) your:

  • Database name
  • Database username
  • Database password
  • Database host (usually localhost)

You will enter these into the installer in the next steps.

Step 5 — Set PHP Version to 8.3 ​

OwnPay requires PHP 8.3. Most hosts let you change this per-domain.

In cPanel ​

  1. Go to Software → Select PHP Version (or "MultiPHP Manager")
  2. Find your domain in the list
  3. Change the PHP version to 8.3
  4. Click Apply or Set as current

In DirectAdmin ​

  1. Go to PHP Version Selector (or Fast PHP)
  2. Choose PHP 8.3 for your domain
  3. Save the changes

In Plesk ​

  1. Go to your domain → PHP Settings
  2. Change the PHP version to 8.3.x
  3. Click OK

PHP Version is Important

If you skip this step or use an older PHP version, OwnPay will not start. PHP 8.3 is required.

Step 6 — Run the Web Installer ​

Everything is ready. Now open your browser and visit your domain:

https://yourdomain.com/install

The OwnPay installer will open automatically. It is a simple multi-step wizard:

Installer Step 1 — Requirements Check ​

The installer checks if your server has everything OwnPay needs (PHP version, extensions, folder permissions).

  • ✅ Green items are good to go
  • ❌ Red items need to be fixed before you can continue

Common issues and how to fix them:

IssueHow to Fix
PHP version too oldGo back to Step 5 and change PHP to 8.3
storage/ not writableIn File Manager, right-click the storage folder → Permissions → set to 755 or 775
Missing PHP extensionContact your hosting support and ask them to enable the extension

Once all items are green, click Continue.

Installer Step 2 — Database Configuration ​

Enter the database details you created in Step 4:

  • Database Host: localhost (leave as is unless your host says otherwise)
  • Database Port: 3306 (leave as is)
  • Database Name: the name you created (e.g. ownpay_db)
  • Database User: the username you created (e.g. ownpay_user)
  • Database Password: the password you set
  • Table Prefix: leave as op_ (recommended)

Click Test Connection — if everything is correct, you will see a success message. Then click Continue.

Installer Step 3 — Admin Account ​

Create your administrator account:

  • Name: Your full name
  • Email: Your email address (used to log in)
  • Password: Choose a strong password (at least 12 characters)

Installer Step 4 — Application Settings ​

  • App Name: Give your OwnPay installation a name (e.g. "My Payment Gateway")
  • App URL: Your full domain URL (e.g. https://yourdomain.com)
  • Timezone: Select your local timezone

Click Install and wait a few seconds. OwnPay will set up the database tables and write your configuration.

Done — Installation Complete! 🎉 ​

The installer will show a success screen with a link to log in. Your login page is at:

https://yourdomain.com/login

Log in with the admin email and password you set in Installer Step 3.

Secure Your Installation

After logging in for the first time:

  1. Go to Settings → General and review your configuration
  2. Enable Two-Factor Authentication under your profile
  3. The installer is automatically disabled after installation — no action needed

Step 7 — Set Up the Cron Job (Required) ​

The cron job runs background tasks like checking payment status, sending notifications, and processing queues. Without it, many features will not work properly.

In cPanel ​

  1. Go to Advanced → Cron Jobs
  2. Set frequency to: Once per minute (or manually enter * * * * *)
  3. In the Command field, enter:
bash
php /home/YOUR_USERNAME/public_html/public/index.php cron

Replace YOUR_USERNAME with your actual cPanel username, and adjust the path if OwnPay is not in public_html.

  1. Click Add New Cron Job

Find Your PHP Path

Some hosts need the full PHP binary path. To find it, go to Terminal in cPanel and run which php. You might need:

bash
/usr/local/bin/php /home/YOUR_USERNAME/public_html/public/index.php cron

In DirectAdmin ​

  1. Go to Cron Jobs from the menu
  2. Add a new cron job with schedule * * * * *
  3. Enter the same command as above (adjusted for your path)

In Plesk ​

  1. Go to Scheduled Tasks in your domain panel
  2. Click Add Task
  3. Set Run to "Cron style" with value * * * * *
  4. Enter the command and save

VPS / Cloud Server ​

This section covers installing OwnPay on a Linux VPS (Ubuntu 22.04 / 24.04 or Debian 12). You will need SSH access to your server.

Recommended for Production

A VPS gives you full control, better performance, and the ability to use Redis for caching. It is the recommended setup for a production payment gateway.

What You Need Before Starting ​

  • A VPS running Ubuntu 22.04 LTS, Ubuntu 24.04 LTS, or Debian 12
  • A domain name pointing to your server's IP address (DNS must be set up before installing SSL)
  • SSH access to the server (Terminal on Mac/Linux, or PuTTY/Windows Terminal on Windows)
  • Around 20–30 minutes of your time

Step 1 — Connect to Your Server ​

Open your terminal and connect via SSH:

bash
ssh root@YOUR_SERVER_IP

Or if you use a non-root user with sudo access:

bash
ssh your_username@YOUR_SERVER_IP

Step 2 — Update the System ​

Always start by updating your server's software:

bash
sudo apt update && sudo apt upgrade -y

Step 3 — Install Required Software ​

Install PHP 8.3, MySQL, Nginx, and all required extensions in one command:

bash
sudo apt install -y nginx mysql-server \
  php8.3-fpm php8.3-mysql php8.3-mbstring php8.3-curl \
  php8.3-xml php8.3-zip php8.3-gd php8.3-bcmath \
  php8.3-intl unzip curl

If PHP 8.3 Is Not Found

On some systems, you may need to add the PHP repository first:

bash
sudo apt install -y software-properties-common
sudo add-apt-repository ppa:ondrej/php -y
sudo apt update

Then re-run the install command above.

Start and enable the services:

bash
sudo systemctl start nginx mysql php8.3-fpm
sudo systemctl enable nginx mysql php8.3-fpm

Step 4 — Set Up the Database ​

Secure MySQL ​

bash
sudo mysql_secure_installation

Follow the prompts. When asked to set a root password, choose a strong one and remember it.

Create the OwnPay Database and User ​

Log in to MySQL:

bash
sudo mysql -u root -p

Once inside the MySQL prompt, run the following commands. Replace STRONG_PASSWORD_HERE with a real, secure password:

sql
CREATE DATABASE ownpay CHARACTER SET utf8mb4 COLLATE utf8mb4_unicode_ci;
CREATE USER 'ownpay'@'localhost' IDENTIFIED BY 'STRONG_PASSWORD_HERE';
GRANT ALL PRIVILEGES ON ownpay.* TO 'ownpay'@'localhost';
FLUSH PRIVILEGES;
EXIT;

Write down the database name (ownpay), username (ownpay), and your password. You will enter them during the installer.

Step 5 — Download and Extract OwnPay ​

  1. Go to the OwnPay GitHub Releases page in your browser
  2. Copy the download URL for the latest .zip file (right-click → Copy Link)

Then on your server, run the following (replace the URL with the one you copied):

bash
cd /var/www
sudo wget https://github.com/own-pay/OwnPay/releases/download/vX.X.X/ownpay-vX.X.X.zip
sudo unzip ownpay-vX.X.X.zip -d ownpay
sudo rm ownpay-vX.X.X.zip

Replace vX.X.X with the actual version number from the releases page.

Step 6 — Set File Permissions ​

OwnPay needs write access to the storage/ folder:

bash
sudo chown -R www-data:www-data /var/www/ownpay
sudo chmod -R 755 /var/www/ownpay
sudo chmod -R 775 /var/www/ownpay/storage

Step 7 — Configure Nginx ​

Create a new Nginx configuration file for your site:

bash
sudo nano /etc/nginx/sites-available/ownpay

Paste the following — replace yourdomain.com with your actual domain:

nginx
server {
    listen 80;
    server_name yourdomain.com www.yourdomain.com;
    root /var/www/ownpay/public;
    index index.php;

    # Route all requests through the front controller
    location / {
        try_files $uri $uri/ /index.php?$query_string;
    }

    # Block access to sensitive files
    location ~ \.(env|git|md|json|lock|installed)$ {
        deny all;
    }

    # Block access to internal directories
    location ~ ^/(src|config|database|modules|tests|vendor)/ {
        deny all;
    }

    # Allow public media files in storage
    location ~ ^/storage/(gateways|uploads)/ {
        allow all;
    }

    # Block all other storage access
    location ~ ^/storage/ {
        deny all;
    }

    # PHP processing — only index.php runs as PHP
    location ~ \.php$ {
        include snippets/fastcgi-php.conf;
        fastcgi_pass unix:/run/php/php8.3-fpm.sock;
        fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name;
        include fastcgi_params;
    }

    # Block hidden files like .htaccess
    location ~ /\.ht {
        deny all;
    }

    # Cache static assets for 1 year
    location ~* \.(js|css|png|jpg|jpeg|gif|ico|svg|woff2|webp)$ {
        expires 1y;
        add_header Cache-Control "public, immutable";
    }
}

Save the file (Ctrl+O, then Enter, then Ctrl+X).

Enable the site and verify the config:

bash
sudo ln -s /etc/nginx/sites-available/ownpay /etc/nginx/sites-enabled/
sudo nginx -t
sudo systemctl reload nginx

You should see: syntax is ok and test is successful.

Step 8 — Install an SSL Certificate (HTTPS) ​

HTTPS is mandatory for a payment gateway. Install a free Let's Encrypt certificate:

bash
sudo apt install -y certbot python3-certbot-nginx
sudo certbot --nginx -d yourdomain.com -d www.yourdomain.com

Follow the on-screen prompts. Certbot will automatically update your Nginx config for HTTPS and set up auto-renewal.

Step 9 — Run the Web Installer ​

Open your browser and go to:

https://yourdomain.com/install

The same multi-step installer described in the Shared Hosting section will appear. Follow Installer Steps 1 through 4 to complete the setup.

VPS-Specific Tips for the Installer

  • Database Host: Use 127.0.0.1 instead of localhost for better reliability on VPS
  • App URL: Enter the full URL including https:// (e.g. https://yourdomain.com)

Step 10 — Set Up the Cron Job ​

The cron job is required for background tasks. Add it to the system scheduler:

bash
sudo crontab -u www-data -e

When prompted to choose an editor, select nano (option 1). Then add the following line at the bottom of the file:

bash
* * * * * /usr/bin/php /var/www/ownpay/public/index.php cron >> /var/log/ownpay-cron.log 2>&1

Save and exit (Ctrl+O, Enter, Ctrl+X).

Confirm it was added:

bash
sudo crontab -u www-data -l

(Optional) Step 11 — Install Redis for Better Performance ​

Redis improves caching and background queue speed. Recommended for high-traffic setups:

bash
sudo apt install -y redis-server php8.3-redis
sudo systemctl enable redis-server
sudo systemctl start redis-server

Then in your OwnPay admin panel under Settings, change the cache and queue driver to redis.

After Installation ​

Once installed, log in to your OwnPay admin panel at https://yourdomain.com/login.

Do these things right after logging in:

  1. Change your password — Go to your profile and update it to something strong
  2. Enable Two-Factor Authentication — Strongly recommended for a payment platform
  3. Create your first Brand — Go to People → Brands from the All Brand.
  4. Connect a Payment Gateway — Go to Gateways and add your payment provider

Troubleshooting ​

The installer won't open or I see a blank page ​

  • Make sure PHP 8.3 is active for your domain (see Step 5 for shared hosting)
  • On shared hosting, verify mod_rewrite is enabled — contact support if unsure
  • Check that all OwnPay files are in the correct folder (the public/ folder must be inside your web root)

Database connection failed in the installer ​

  • Double-check the database name, username, and password — they must match exactly what you created
  • On shared hosting, the host is almost always localhost
  • Make sure the database user has All Privileges on the database

500 Internal Server Error ​

  • On VPS: Check Nginx error logs: sudo tail -50 /var/log/nginx/error.log
  • On VPS: Check PHP-FPM logs: sudo journalctl -u php8.3-fpm --no-pager -n 50
  • On shared hosting: Open your control panel and look for Error Logs under the domain or hosting section

Folder permission errors on shared hosting ​

  • In File Manager, right-click the storage/ folder → Change Permissions → set to 755
  • If that does not work, try 775

The /install page says "Already Installed" ​

OwnPay creates a lock file after a successful installation to prevent accidental re-installation. This is expected and normal behavior. If you need to genuinely reinstall (e.g. starting over with a fresh database), contact support for assistance.

Next Steps ​